Notifications
Clear all

Crosscut Saw Info

Posts: 713
Admin
Member
Joined: 15 years ago

I have been finding filing stuff at antique stores for quite a bit less than e-bay for the last year or two now.

Craigs list is the place to round up saws. There are a few dreamers out there, but many are reasonable.

If your saw is way out of joint, probably ought send it to Jim for a once over and then you can keep it in joint with the little jointers.

Kinda want to ride over to Layfayette and check out Don's Tools.

Reply
Posts: 316
Topic starter
Member
Joined: 15 years ago

Side 1 all cleaned of rust down to shiny metal. After starting on side 2, I found the original marker's mark! It says:

Henry Disston
Spring Steel
Xtra High Temper
Four Gauges Thinner on Back
NEVADA
Recommended for fast cutting
Philadelphia PA

I'm guessing 20s-30s vintage.

Reply
Posts: 316
Topic starter
Member
Joined: 15 years ago

Received my nice restored Western handle from Jim's Crosscut!  Time to get busy on that saw.

Reply
Page 2 / 2